SVG là sản phẩm mở rộng của RTR. Thiết bị này không chỉ cải thiện hệ số công suất mà còn có thể giảm sóng hài xuống THDi <5% và cân bằng tải..
SVG là sản phẩm tiên tiến của RTR có khả năng tạo ra dòng điện bù (có cùng cường độ nhưng ngược pha) trong thời gian thực để có được hệ số công suất mong muốn và có thể theo dõi sóng hài lên đến bậc 15, do đó cải thiện chất lượng năng lượng.
Nguyên tắc hoạt động của SVG
- Khi tải tạo ra dòng điện cảm ứng hoặc điện dung, nó làm cho dòng điện trễ hoặc tăng lên.
- SVG phát hiện sự khác biệt về góc pha và tạo ra dòng điện dẫn trước hoặc trễ vào lưới, làm cho góc pha của dòng điện gần giống với điện áp ở phía nguồn, giúp điều chỉnh hệ số công suất cơ bản về trạng thái thống nhất.
- SVG chiết xuất dòng điện hài của mạng sao cho cường độ của dòng điện sẽ bằng với dòng điện hài ở phía tải. Trong khi pha của nó ngược pha với sóng hài dòng điện phía tải, đảm bảo giá trị hiệu dụng của sóng hài dòng điện phía nguồn giảm đến mức không đáng kể.
Thông số kỹ thuật | ||
Định mức | 50kVAr | 100kVAr |
Điện áp định mức | 308V tới 480V | |
Tần số | 50/60Hz (±2.5Hz) | |
Vận hành song song | Lên tới 8 units | |
Hiệu suất năng lượng | >97% | |
Kiểu kết nối | 3P3W / 3P4W | |
Phạm vi CT | Cấu hình theo màn hình lên đến 10000/5A | |
Vị trí CT | Phía lưới / phía tải | |
Kiểu mạch | biến tần 3 cấp | |
Hiệu suất | ||
Khả năng bù của một module | 50kVAr | 100kVAr |
Thời gian đáp ứng | 50μs và phản hồi đầy đủ trong vòng chưa đầy 1 chu kỳ | |
Hệ số công suất mục tiêu | Điều chỉnh từ -1 to +1 | |
Chế độ làm mát | Làm mát bằng không khí cưỡng bức | |
Mức độ ồn | <65dB | |
Phổ bù thông thường | Lên đến sóng hài bậc 15 | |
Chức năng bảo vệ | Quá dòng, quá áp, quá nhiệt, bảo vệ bão hòa IGBT, lỗi nguồn điện | |
Năng lực truyền thông và giám sát | ||
Cổng giao tiếp | RS485 (MODBUS-RTU), có thể qua mạng LAN, WIFI (phải trả phí ) | |
Giao thức truyền thông | RS485 (MODBUS-RTU), có thể qua mạng LAN, WIFI (phải trả phí) | |
Phương thức giao tiếp | Màn hình / hiển thị đơn sắc cơ bản Màn hình cảm ứng 4.3’’ (7’’ theo yêu cầu) | Màn hình đơn sắc cơ bản / HMI 7’’ và 10’’ (4.3’’ theo yêu cầu) |
Nâng cấp phần mềm | Có thể qua WIFI hoặc qua máy tính xách tay | |
Tính chất cơ học | ||
Kiểu lắp | Sàn (loại giá đỡ) | Treo tường |
Kích thước (dài x rộng x cao) mm | 470 x 653 x 270 | 470 x 700 x 240 |
Cân nặng | 50kg | 75kg |
Màu sắc | RAL 7035 | |
Điều kiện môi trường | ||
Độ cao | <2000m (độ cao cao hơn, theo yêu cầu) | |
Nhiệt độ hoạt động | -10ºC to 45ºC | |
Độ ẩm tương đối | 95%, không ngưng tụ | |
Cấp bảo vệ | IP 21 | |
Tiêu chuẩn và quy địnhs | ||
CE, EN 50178 :1197 / IEC 50178:1997, EN 61000_6_2 (2005) / EN55011, IEC 61000_6_2 (1999) |
RTR introduces a new compensation system in its wide range of products, the SVG. This device is not only capable of power factor correction, but can also reduce harmonics to <5% THDI.
RTR’s advanced SVG is capable of generating a compensation current (same magnitude, but opposite phase) in real time to achieve desired power factor and can monitor harmonics up to 15th order thus improving power quality.
SVG working principle
• When the load draws inductive or capacitive current, it causes the current to lag or lead the voltage.
• The SVG detects the difference in phase angle and generates a leading or lagging current in the network, making the phase angle of the current almost the same as that of the voltage on the transformer side, which corrects the factor fundamental power to unity.
• The SVG draws harmonic current from the network in such a way that the magnitude of the current is the same as the harmonic current on the load side.
While its phase is opposite to that of the harmonic current on the load side, which ensures that the effective value of the harmonic current on the source side is reduced to a negligible level.
Advantages
• Elimination of harmonics It sets the required amount of reactive current in real time and compensates for the harmonic current (up to 15th order) consumed.
• No steps Instantaneous, continuous, without steps and without interruptions. It does not influence the fluctuation of the mains voltage.
• Correction of phase unbalance Capable of correcting imbalance by programming the device.
• No resonances or transients No risk of harmonic resonances with the network and no transients as there is no switching of passive components.
• Quick response Fast setup capability provides fast response time as low as 50μs and full response in less than 1 cycle.
• Easy installation and maintenance Simple installation, compact modules. Great useful life since there is no electromechanical switching or risks of transients and resonances
UNBALANCE COMPENSATION BETWEEN PHASES FOR 3P3W AND 3P4W
RTR’s SVG is capable of correcting the imbalance existing between phase-phase and phase-neutral for what it does make it a perfect solution for compensation of reactive power with unbalanced load. It is capable to detect the current of each phase and act individually on each of them to improve the power factor. Individually feed current of compensation to each phase to improve the factor of power.
POWER COMPENSATION REACTIVE AND HARMONIC
Characteristics
* Controllable reactive current source.
* Compensation of current harmonics up to order 15.
* Continuous and precise control.
* Compensation for current imbalance created by the load.
* Individual current correction in the three phases.
* Instantaneous response time of 50μs and full response of less than 1 cycle.